Riley Rover Rescue | EV3 | Starter Bot | Build Steps
Riley Rover Rescue | EV3 | Starter Bot | Build Steps
This base build is not too difficult and whilst simple, can be easily upgraded once complete. All parts required are included in the EV3 base kit. You may wish to add some stick on felt or similar to the bottom two angle pieces added to the robot in the second series that hold the back up as this will allow better movement of the robot. Stick on felt (self adhesive) is available at your local craft or hardware store.The robot is configured as follows:
Colour Sensor - Port 1
Motors - Connect the motor to the motor port (A or D) that is on the same side of the robot as the motor
