Lego Mindstorms NXT 2.0 Printer by David Purdue with CE Modifications v01 | Bill of Materials

Lego Mindstorms NXT 2.0 Printer by David Purdue with CE Modifications v01 | Bill of Materials

The Lego Mindstorms NXT 2.0 printer, originally published by David Purdue in his book Unofficial LEGO MINDSTORMS NXT 2.0 Inventor's Guide and modified by Club Engineer ( you should buy the book, its brilliant and a much better guide than the build instructions below.)

To build the Lego Mindstorms NXT 2.0 printer by David Purdue with CE Modifications, you will need the following parts.

Description

Photo (Not to Scale)

Number Required

NXT Brick

   1

NXT Motor

   3
NXT Light Sensor    1
NXT Touch Sensor  2
NXT Low Profile Tyre    2
Wheel Rim    2
 Medium (35cm) Cable    4
 Long (50cm) Cable    2
     
 2 Module Beam with Lift Arm    2
3 Module Beam  9
5 Module Beam  10
7 Module Beam  12
9 Module Beam  13
11 Module Beam  6
13 Module Beam  10
15 Module Beam    2
     

5M x 3M Right 
Angle Beam

   13
 2M x 4M Right 
Angle Lift Arm Beam
   13
 3M x 4M x 7M Bent 45Deg Double    5
 3M x 7M 135Deg Lift Arm Beam    6
 4M x 4M 135Deg Lift Arm Beam    2
3M x 3M Tee  1
     
Peg  44
Double Peg  84
Peg with Axle  18
Peg, Double with Cross Hole  10
Peg, 4 Way with Cross Hole  3
Double Cross Block  2
Bion Eye  2
Axle Extension  1
Cross Block, 2 x 1  2
Cross Block with Fork, 2 x 2  3
Cross Block, 2 x 1  7
Axle Joiner, 180Deg  6
Axle End  2

Axle Joiner, 90Deg

 2
Axle Joiner, Perpendicular  3
3 Module Beam with 4 Pegs  5
3 x 3 Module Beam with 4 Pegs  4
Comb Wheel  2
Rubber Band  
     
2 Module Axle    7
     
3 Module Axle    4
4 Module Axle  4
3 Module Axle with Peg  2
5 Module Axle  4
6 Module Axle  1
7 Module Axle  4
8 Module Axle with Stop  2
9 Module Axle    1
12 Module Axle  1
Bushing  12
Half Bushing  8
     
12 Tooth Double Bevel Gear  2
20 Tooth Double Bevel Gear  1
36 Tooth Double Bevel Gear  2



Toggle menu